Power Transformers

These are basically step-down transformers reducing transmission/sub-transmission voltage to primary feeder level.

Ratings

Single Phase up to 3333 kVA, Three Phase up to 50000kVA

Number of Phases

Single / Three Phase

Applicable Standards

IS, IEC, BS, ANSI, NBR etc.

Cooling

ONAN

Insulating Fluid

Mineral Oil/Natural Ester or as per specification

Frequency

50 Hz, 60 Hz

Vector Group

As Specified

Primary Voltage

Up to 132 kV

Secondary Voltage

3.3, 6.6, 11, 22, 33, 66 kV (other voltages as required)

Winding Material

Copper / Aluminium

Tapping Range

+5% to -5% in steps of 2.5%
(other tappings as required in line with applicable standards and/or as per customer requirement)

Impedance

In line with applicable standards and/or as per customer requirement

Standard Fittings
  • Primary bushings
  • Secondary bushings
  • Off circuit tap changer
  • Pressure relief device
  • Oil level Indicator
  • Filter valve
  • Drain valve
  • Rating & Diagram plate
  • Lifting lugs
  • Bottom mounting channels
  • Earthing terminal
  • Thermometer Pocket With Cap
Optional Fittings
  • Oil temperature indicator
  • Winding temperature indicator
  • Magnetic oil level gauge
  • Buchholz relay
  • On load tap changer
  • Conservator and Silica gel breather
  • Oil Filling Plug
  • Air Release Plug
  • HV / LV cable box
  • Rollers

Prominently used in

Transmission Substations

Grid and Pooling Substations

Large Industrial Plants

Power Generation Stations

HV/MV Switching Yards

Renewable Energy Systems

wpChatIcon